Idiomas disponibles
Idiomas disponibles
Translation of the Original
GB
Operating Instructions
Battery-powered long-neck
angle grinder LHW/A
Dear customer!
Always keep these operating instructions and
the enclosed safety guidelines within reach.
Only use this device with exact knowledge of
it and comply with the instructions and safety
guidelines!
This is necessary to ensure safe operation and,
secondly, it facilitates familiarisation with the
device and its functions.
Proxxon assumes no liability for the safe func-
tion of the device in the case of:
• handling that does not comply with normal
intended use,
• use for other purposes not mentioned in the
manual,
• incorrectly executed repairs,
• failure to heed safety instructions,
• external effects for which the manufacturer is
not responsible.
We recommend using PROXXON original spare
parts for all repair and maintenance work.
Repairs should only be performed by qualifi ed
skilled personnel!
Please note: All information contained in these
operating instructions - especially the technical
data - corresponds to the status at the time of
printing.
We reserve the right to make further develop-
ments in the interest of technical progress. We
wish you every success with the device.
Wwarning!
Read all safety warnings and in-
structions. Failure to follow all sa-
fety warnings and instructions listed
below may result in electric shock, fi re and/or
serious injury.
KEEP ALL SAFETY WARNINGS AND INSTRUC-
TIONS FOR THE FUTURE !
Safety guidelines for all operations
a) This power tool can be used as grinder,
sander and abrasive cutting-off tool.
Please observe all safety guidelines,
instructions, illustrations and data pro-
vided with the device. Failure to follow in-
structions listed below may result in electric
shock, fi re and/or serious injuries.
b) This power tool is not suitable for wor-
king with wire brushes and polishing
Uses for which the power tool is not inten-
ded can cause hazards and injuries.
c) Do not use accessories which are not
designed or recommended by the manu-
facturer specifi cally for this power tool.
Just because the accessory can be attached
to your power tool does not assure safe use.
d) The rated speed of the bits and cutters
must be at least equal to the maximum
speed specifi ed on the power tool. Acces-
sories that turn faster than their rated speed
can break and fl y apart.
e) The outside diameter and thickness of
the bits and cutters must be within the
capacity rating of your power tool. In-
correctly sized bits and cutters cannot be
adequately guarded or controlled.
f) The arbour size of discs, fl anges, grin-
ding discs or other accessories must
properly fi t the grinding spindle of your
power tool. Bits and cutters that do not fi t
the grinding spindle of the power tool pro-
perly will turn unevenly, vibrate very stron-
gly and cause loss of control.
g) Do not use damaged bits and cutters.
Before each use, inspect bits and cut-
ters such as sanding discs for chips and
cracks, grinding discs for cracks, strong
wear or tear, wire brushes for loose or
broken wires. If the power tool or bits
and cutters are dropped, check for da-
- 13 -
