Parameter Mode; Configuration Mode - ERSA i-CON 2V MK2 Manual Breve

Function description
This shows the station name and software version of the i-CON 1. The station then
goes into working mode.
6.5

Parameter mode

The parameter mode for the soldering tool is activated by pressing the i-OP and
keeping it pressed for 2 seconds.
6.6

Configuration mode

To reach the configuration mode, keep the i-OP pushed for 5 seconds when you
switch on the i-CON 1.
Ersa GmbH
a) Turn the i-OP to select a menu item, then press it.
3BA00270 | Rev. 1 13