ERSA i-CON 2V MK2 Manual Breve página 23

Dangerous electrical voltage!
Death or very serious injuries due to electric shock!
Eating and drinking forbidden!
Toxic fumes when soldering!
During soldering, emissions are produced from the solder materials and the as-
semblies. These emissions are harmful to health. Do not inhale the fumes!
6
WARNING
a) In the event of faults in the electrical power supply, switch off the soldering
station immediately!
b) Work on electrical parts may only be carried out by a qualified electrician or
by persons instructed in electrical engineering under the direction and super-
vision of a qualified electrician in accordance with the electrotechnical regula-
tions!
c) Never open the device!
d) Only use original fuses with the prescribed current rating!
e) Only use voltage-insulated tools!
f) Protect the connecting cable:
Do not use the connecting cable to pull the mains plug or to carry the device!
Keep connecting cables clear of heat, oil or sharp edges. Replace a damaged
connecting cable immediately, as this may lead to fires, short circuits and
electric shock!
CAUTION
ü Solders and solder materials are toxic. To prevent them from entering the or-
ganism, observe the following:
a) Do not eat, drink or smoke in rooms where soldering is taking place!
b) Always wash your hands thoroughly after working with solder and flux materi-
als!
c) Adhere to the safety data sheets for the solder and flux materials used!
CAUTION
a) Ensure sufficient ventilation or use a solder fume extraction system!
b) Adhere to the safety data sheets for the solder and flux materials used!
3BA00270 | Rev. 1
For your safety
Ersa GmbH