LG WS9D76 Serie Manual De Instalación página 9

Installing the Oven and
Test Run
Electrical Connections
3-Wire Circuit Connection
The oven must be connected by a licensed
specialist in accordance with these instructions and
in compliance with local regulations. Make sure the
voltage shown on the rating label is the same as
the power supply voltage in your home.
The oven must be connected to the power supply
by means of an all-pole disconnect switch with a
minimum contact gap of 3 mm and must be
connected to earthed socket by law. The supply
disconnect (isolation) switch shall be accessible
after the installation. The oven's components
operate at 230 V / 16 A. Identify the phase and
neutral conductor on the supply lead before
making connection. Incorrect connection may
damage the oven.
Connect the oven to the power supply.
a Live
Neutral
b
Earth
c
NOTE
• Connect the green and yellow ground wire to the
right terminal pole, the live brown or red wire to
the left terminal pole, and the neutral blue or
black wire to the center terminal pole.
INSTALLATION
9