Idiomas disponibles
Idiomas disponibles
Dry-well temperature calibrator / English
1
2
Fig 2. Back Panel Description
Wind input
1
Fuse of heater
2
Fuse of temperature control system
3
Input power socket
4
Power switch
5
6.7 Do not setup the temperature instantly too high, the Max span is about 100°C,
after stability then set the temperature to higher again.
6.8 Reduce the temperature below 60° after measurement, when the temperature
is reduced below 60°C the user can turn off the power.(warning: turning off the
power at high temperature will be easy to destroy the calibrator, which should
be coldened by fan.)
7. Maintenance
The calibration instrument has been designed with the utmost caution. Ease of
operation and simplicity of maintenance have been a central theme in the product
development. Therefore, with proper care the instrument should require very
little maintenance. Avoid operating the instrument in dirty or dusty environments.
If the instrument is used in a manner not in accordance with the equipment
design, the operation of the instrument may be damaged or safety hazards
may arise.
6
3
4
5
Manuel d'instructions
BX-150
Numéro de stock: 193-8701
Calibrateur de température à sec
FR
