Idiomas disponibles
Idiomas disponibles
4 Transport and storage
4.1 Transporting the product
Hazards during transportation
• Proceed with caution and observe the information on the packaging when un-
loading and transporting the packaged product to the destination.
• Ensure that the product cannot fall down before the product is released from
the mountings.
• Take steps to avoid damage when lifting the product.
• Wear PPE.
4.2 Storing the product
Damage due to incorrect storage
Unfavorable storage conditions can result in corrosion and material deteriora-
tion.
• Only store the product in locations which are dry, cool, and prevent corrosion.
• Protect the product from direct sunlight and UV radiation.
• Keep the product in its packaging until the time of installation.
• Also observe any additional storage information on the product packaging.
Elastomer parts
Pneumatic components typically have elastomer seals that are subject to a con-
stant process of aging.
• Products that have been stored for longer than 2 years have a shorter service
life.
• The aging process can be accelerated by heat and light (UV rays).
If you are unsure about the status of the elastomer seals, Get in touch with our
contact address. See back cover.
Compressed air connections
• Ensure that all compressed air connections are protected against contamina-
tion by protective caps.
• Tape open compressed air connections or provide them with suitable protec-
tive caps.
4.3 Returning the product
• Before returning the product: Get in touch with our contact address. See back
cover.
• Observe the storage conditions until such time as you return the product.
5 Product description
5.1 Brief description
The Sentronic 625 pressure regulator is a digital electronic pressure regulator.
The pressure regulator is designed for various output pressures.
The product is used for the following tasks:
• Changing pressures electrically
• Adjusting pressures remotely
The product is factory calibrated.
5.2 Labeling and identification
Product identification
The ordered product is clearly identified by the material number. The material
number can be found in these locations:
• On the name plate.
CE mark and UKCA identification
This product complies with the Electromagnetic Compatibility (EMC) Di-
rective 2014/30/EU and its amendments. The product is labeled with CE
and UKCA identification. The declaration of conformity is available on re-
quest.
Please provide the material number and serial number for the correspond-
ing products.
AVENTICS™ Sentronic 625 | IM502079-014-R01 | English
5.2.1 Configuration of the material number
Sentronic 625 – digital electronic pressure regulator
G
XXX
R
C
G
Thread connection
R
Flange version
G
G thread
8
NPT thread
XXX
Product series
625
Series 625
R
Revision letter
A
Initial release
C
Connection
A
M12x5
B
M12x5 with display
C
M16x7
D
M16x7 with display
H
M12x8
J
M12x8 with display
S
Size
0
DN1 / 1/8" / BRASS
1
DN1 / 1/8" / SS
2
DN3 / 1/8" / BRASS
3
DN3 / 1/8" / SS
4
DN3 / 1/8" / ALU / Fine
5
DN6 / 1/4" / ALU
6
DN6 / 1/4" / SS
7
DN6 / 1/4" / BRASS
8
DN6 / 1/4" / BRASS HP
9
DN12 / 1/2" / ALU
A
DN12 / 1/2" / SS
B
DN20 / 1" / ALU
C
DN20 / 1" / SS
S
Set point
0
0 ... 10 V
1
0 ... 20 mA
2
4 ... 20 mA
4
1 ... 5 V
F
Feedback
0
0 ... 10 V / OUT
1
0 ... 20 mA / OUT
2
4 ... 20 mA / OUT
3
0 ... 10 V / IN
4
0 ... 20 mA / IN
5
4 ... 20 mA / IN
7
1 ... 5 V / OUT
A
Frequency IN
V
Version
0
Digital OUT (PNP)
1
Digital IN
2
No Documentation / Digital OUT (PNP)
3
No Documentation / Digital IN
A00
Options
A00
Standard
A01
Oxygen-compatible
PP
Pressure range
01
1 bar
30
02
2 bar
31
S
S
F
V
D
DN1 / 1/8" / ext. / BRASS
E
DN1 / 1/8" / ext. / SS
F
DN3 / 1/8" / ext. / BRASS
G
DN3 / 1/8" / ext. / SS
H
DN3 / 1/8" / ALU / ext. / Fine
J
DN6 / 1/4" / ext. / ALU
K
DN6 / 1/4" / ext. / SS
L
DN6 / 1/4" / ext. / BRASS
M
DN6 / 1/4" / ext. / BRASS HP
N
DN12 / 1/2" / ext. / ALU
P
DN12 / 1/2" / ext. / SS
Q
DN20 / 1" / ext. / ALU
R
DN20 / 1" / ext. / SS
3)
30 bar
P6
0 ... 300 psi.
2)
31 bar
P7
0 ... 350 psi.
A00
PP
1)
3)
17
