Forest-Master FM5D Manual Del Usuario página 10

ATTACH THE WORK BENCH AND GUARD (UK & European Union Only)
The work bench and guard are only necessary to comply with CE Approval and health and safety at
work legislation in the European Union. Outside of the European Union the individual user can choose
to not use either or just use the work bench. If you have purchased a stand for your log splitter, you
may find it easier to fit the stand before fitting the work bench and guard.
The work bench & guard package contains
1 x Work Bench (with rear brackets attached)
6 x Guard panels
25 x M6x12 Button Head Bolts (1 spare)
5 x M6x16 Cap Head Bolts ( 7 for FM10) (1 spare)
25 x M6 nyloc Nut (1 spare)
5 x M6 Spring Washers (7 for FM10) (1 spare)
53 x M6 Flat Washers ( 55 for FM10) (1 spare)
Attaching The Tray
Using an M6 Allen key (not supplied), undo the
bolts and remove the existing log support rails.
If the lifting handle is fitted to the ram
crosspiece, unbolt and remove it.
Attaching The Work Bench
For shipping, the rear mounting brackets are fastened to the faces to which they attach, in a reversed
position. Before assembly, remove the long mounting bracket (it will be re-attached later) and remove
then reverse the short rear bracket. Note that it must still be fixed to the inner face of the rear side.
10
10
REMOVE
REVERSE
FM5, FM8 & FM10 (Versions D, T & TW) FM5, FM8 & FM10 (Versions D, T & TW)