Idiomas disponibles
Idiomas disponibles
Maintaining
your washer
Cleaning the exterior
Turn off the water faucets after finishing
the day's washing.
This will shut off the water supply to
your washer and prevent the unlikely
possibility
of damage from escaping
water. Leave the lid open to allow the
inside of your washer to dry out.
2,
3.
Use a soft cloth to wipe up all detergent,
bleach or other spills as they occur.
Clean the following
as recommended:
Control Panel - Clean with a soft, damp
cloth. Do not use abrasive powders or
cleaning pads. Do not spray cleaners
directly
on the panel.
Cleaning the interior
Clean the interior
of your washer
periodically
to remove any dirt, soil, odor,
mold, mildew, or bacterial residue that
may remain in your washer as a result of
washing clothes.
Failure to follow these instructions
may
result in unpleasant conditions,
including
odors and/or permanent
stains on your
washer or laundry.
Hard water deposits may be removed, if
needed. Use cleaners labeled "Washer safe".
Storing your washer
Washers can be damaged if water is
not removed from hoses and internal
components
before storage.
Prepare your washer for storage as follows:
1, Select the Quick Wash cycle and add
bleach to the automatic
dispenser. Run
your washer through
the cycle without
a load.
2, Turn the water faucets off and
disconnect the inlet hoses.
3,
Unplug your washer from the electrical
outlet and leave your washer lid open to
let air circulate
inside the drum.
If your washer has been stored in
below-freezing
temperatures,
allow time
for any leftover
water in your washer to
thaw out before use.
46
English
WA7700]
WA48J7700AW
03520D
0]
ENindd
46
2(}15/4/16
9:38:4(}
