Idiomas disponibles
Idiomas disponibles
Installation
2.
Connect the ends of the water supply
hoses to the hot (B) and cold (A) faucets.
Tighten the fittings
by hand until they
are snug, and then tighten them an
additional
two-thirds
of a turn with a
wrench.
/!_ CAUTION
When you fasten the fittings,
do not fasten
them too tightly
or apply tape or sealant to
the faucets or water supply intakes. This can
damage the fittings.
NOTE
After you have connected the water supply
hoses to the faucets, ensure that they are
connected correctly
by pulling the water
supply hoses downwards.
3_
Place the unconnected
ends of the hoses
into a bucket and open the faucets
connected to the two water supply hoses
for 10 or !5 seconds to remove any
foreign substances from the hoses. Close
the faucets before continuing.
22
English
\\TA771)0]
\\TA481771)0A_S'
03520D
01 ENindd
22
2015/4/16
9:38:34
