Idiomas disponibles
Idiomas disponibles
The basics
Water Jet and Built-in
sink( help you
handwash before the washing machine
starts operation. Water Jet is available only
when the door is open with the water level
set to less than High. For prewashing,
use
the Built-in
sink that is designed to facilitate
the hand-wash.
1, With the door open, lower the Built-in
sink. To open only the door, press and
release the front right corner of the
door. To close and lock both the door
and the Built-in sink, press down the
door until you hear a clicking sound.
2.
Put clothes to prewash in it.
3.
Press Water Jet to supply water to the
Built-in sink, and hand-wash.
When done, gently lift up the Built-in
sink to drain water into the tub.
Prewash (Water Jet & Built-in sink)
NOTE
*
If you want to hand-wash
while the
machine is operating,
press Start/Pause
to stop operation,
and then follow steps
!-4 above.
,
If you open both the door and the
Builtin sink, lower the Built-in sink
manually for prewashing.
[Water Jet stops]
•
Water Jet stops operation
automatically
when the washing machine detects the
maximum water level.
•
Water Jet stops operation
automatically
5 minutes after it begins. To add more
water, press Water Jet again to resupply
water.
English
39
\\TA7700]
\VA4817700A_S'
03520D
0l
ENindd
39
2015/4/16
9:38:38
