Hitachi ATW-IOT-01 Manual De Instrucciones página 13

DESCRIPTION OF THE PARTS
4. DESCRIPTION OF THE PARTS
Not used H-LINK
Power
connection
cord
cable
5. TECHNICAL DATA
• Supply voltage: 230V/50Hz (30mA)
• Wattage: 7W (maximum)
• Dimensions (mm): 122x36.5x115
• Weight (g): 172 g
• Class 2 reinforced insulation device
• Operating Temperature: 0°C to + 40°C
• Operating Humidity:
between 30% and 80%.
• Equipment protection rating: IP21
• Maximum altitude for use: < 2000m
6. COMMUNICATION
• Wifi: 2.4 GHz Wi Fi (IEEE 802.11 b/g/n)
(2412 ~ 2484 MHz, max transmit
power 20dBm)
• Bluetooth: 5 (LE) (2402~2480 MHz, max
transmit power 20 dBm using AFH)
• In case of using WI-FI 6 or equivalent,
may be necessary to disable 5GHz
network or to create separate 2.4GHz
network.
PMML0635 rev.3 - 04/2024
• YUTAKI H-LINK:
✓ Communication line: Use
✓ Communication system:
Button 2
✓ Communication method:
✓ Transmission Speed:
Button 1
✓ Wiring length: 1,000m maximum
Yellow LED
for remote
update ✓ Maximum number of
Green LED
for Cloud
6.1 Simplified declaration of
connection
Hereby, Johnson Controls-Hitachi
declares that the radio equipment
type 2 is in compliance with EU directive
2014/53/EU and UK S.I. 2017 No. 1206
relating to radio Equipment.
Important Notice for the UK market
only: This device and its related
applications comply with the applicable
security requirements in Schedule
1 of The Product Security and
Telecommunications Infrastructure
(Security Requirements for Relevant
Connectable Products) Regulations
2023 – S.I. 2023 nº 1007 on consumer
protection in the UK. The Statement of
Compliance is available in the product
website.
7. OPERATION INSTRUCTIONS
ATW-IOT-01 is the home automation
device dedicated to the Hitachi Heating
range, allowing remote management of
Hitachi heating units from CSNET Home
applications.
To allow such operations, ATW-IOT-01
must be connected to the Hitachi cloud
through a WiFi network (2,4 GHz signal).
0.75mm cable, 2-Conductor,
2
Stranded Copper
Half-duplex
Asynchronous
9,600 bauds
(total length of H-LINK I/O bus)
ATW-IOT-01 per H-LINK line: 1
conformity
EN
3