Powerplus POWX1410 Traduccion Del Manual De Instrucciones Originale página 33

8 ASSEMBLY
Check for damage to the tool, parts and accessories which may have occurred during
transportation. Take some time to read this manual carefully and understand all the content
prior to assembly and operation.
CAUTION! Always ensure that the tool is switched off and unplugged from
the mains supply before assembly.
8.1 Changing the blade (Fig. 1, 2, 3)
Incorrect positioning of the blade can permanently damage the tool.

Ensure the tool is unplugged from the mains supply.

Set the cutting depth to the maximum.

Press and hold the spindle lock button (11) on, release the clamping screw with plain
washer (9) by using the inner hexagon wrench (turn clockwise to open). Remove the
clamping screw with plain washer and outer

Lift up removable protective cover (2) by the lever (7).

Remove the saw blade.

The installation of a sawblade is done in the reverse order.

Press the spindle lock button (11) (until it engages) and tighten the clamping screw (9)
firmly.
The arrow on the saw blade must agree with the arrow showing the
direction of rotation
8.2 Dust extraction (Fig. 4)

The metal saw has a dust collection box (13) which collects the chippings from cutting the
work piece when working.

If the dust collection box is full, open the cover (12) of dust collection box, empty dust,
scrap iron, etc. in the body, finally clean the dust collection box.
Copyright © 2016 VARO
POWX1410
(running direction shown on the device).
P a g e | 6
EN
www.varo.com