KS — AX504
|
4. Removal of Main Parts
Hi Removing the bottom cover (See Fig. 4- 1)
Turn the body upside down and remove the four screws
@ retaining the bottom cover.
Bottom cover
@ Removing the front panel (See Fig. 4- 2)
1. Remove the three screws © retaining the rear panel.
2. Remove the seven screws @ retaining the rear panel
from behind the body.
Mi Removing the main board (See Fig. 4-2)
Remove
the seven
transistor bracket set screws
©
retaining the main board and the one lug wire set screw
©.
Rear panel
Fig. 4-2
10 (No. 49402)
