Idiomas disponibles
Idiomas disponibles
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
Explanation of the symbols used (see Fig. 8)
1. Danger! - Read the operating instructions to
reduce the risk of injury.
2. Caution! Wear ear-muff s. The impact of noi-
se can cause damage to hearing.
3. Caution! Wear a breathing mask. Dust
which is injurious to health can be generated
when working on wood and other materials.
Never use the device to work on any materi-
als containing asbestos!
4. Caution! Wear safety goggles. Sparks ge-
nerated during working or splinters, chips and
dust emitted by the device can cause loss of
sight.
5. Take due note of the machine's direction of
rotation.
6. Each time before use, oil the compressed air
tool via the compressed air connection.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
2. Layout and items supplied
2.1 Layout (Fig. 1-7)
1. Clamp nut
2. Clamp
3. Clamp holder
4. Operating switch
5. Safety lock-off
Anl_TC_PA_50_SPK13.indb 13
Anl_TC_PA_50_SPK13.indb 13
GB
6. Nipple for the air connection
7. Oil bottle (without oil)
8. Chuck key, 11 mm
9. Chuck key, 17 mm
10. Air outlet, can be swiveled
11. Compressed air connection
12. Grinding disk
13. Abrasive paper
14. Grinding disk holder with shaft
15. Intermediate disk
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any pa-
ckaging and/or transportation braces
(if available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
1x grinding disk
•
2x chuck key
•
1x nipple for the air connection
•
1x grinding disk holder with shaft
•
50x abrasive paper
•
1x intermediate disk
•
1x oil bottle (without oil)
•
Original operating instructions
•
Safety information
3. Proper use
This machine is designed for the grinding, po-
lishing and derusting of metal, wood and other
materials through the use of suitable abrasive
- 13 -
07.12.2023 13:13:27
07.12.2023 13:13:27
