Idiomas disponibles
Idiomas disponibles
Installation
Instructions
WINDOW
INSTALLATION--OPTIONAL
(cont.)
[] PREPAREWINDOW
[]
Mark the centerline
of the stool, Measure
from the centerline
13%" on both sides for
the panel cuts.
[]
Measure
12%" from the centerline
on both sides
for the sill support
brackets.
Centerline
Stoo
Centerline
.,_.-..-12
%,,-------_
[] INSTALL SILL SUPPORTS
[]
Assemble
the sill supports.
Do not fully
tighten
the spacer mounting
screws at this
time.
Type
B ---__
_
_tA
Type
E "_------_,t-_'_
i
.__..,I_'k%,./'_
___e.._
_
SPra_sr Typem°U
nti(A)ng
Sill -m_
_
support
_-
Spacer
Lock n ut -_-
Adjusting
bolt -_
Large washer _)
(For use with wood
sills)
[]
Before attaching
the sill supports,
place
them on the window
stool. Select the spacer
position
that will place the spacer near the
outermost
point on the sill. Tighten
the
spacer mounting
screws.
Screws are in position
Sill
support
"V" notch
[]
Turn the bolts and tighten
the lock nuts to make
the sill supports
level or tilt down
1/8" to the
outside.
Line up the "V" notch with
12%" marks.
Drill pilot holes and attach the sill supports.
Average sill
-I/_-_
Spacer
Sill support
Narrow sill
Offset sill (such as brick or stone)
NOTES:
• On narrow
sills, there may not be enough
room to
use the lock nut.
• A deep offset sill may require
a longer adjusting
bolt than the standard
hex head bolt provided.
• On wood
sills use the large washer
between
the
bolt head and the sill. This prevents
the bolt from
digging
into the wood.
18
