GE 22 Manual Del Propietario E Instalación página 4

About the controlson the refrigerator.
Thecontrols will look like one of the following:
(
Initially, set the refrigerator control at5 and the freezer control at 5
and allow 12-24 hours for the temperature to stabilize.
Several adjustments may be required. Adjust the controls one
increment at a time, and allow 12hours after each adjustment for
the refrigerator to reach the temperature you have set.
Setting the controls to 0 stops cooling in both the refrigerator and
freezer compartments but does not shut off electrical power to
the refrigerator. On some models, only the refrigerator control has
a 0 setting.
Touchpad controls
* SettingeithercontrolatOwillautomaticallysettheothercontrolatO.
The zeros will blink until you set the controls.
* If both controls are set at 0 and either COLDER pad is pressed, the
controls will automatically reset to 5.
Controlsettings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
Locking the Controls (onsomemodels)
This _eature allo_:_ you to lock the controls
so the settings cannot be changed.
Tolock the controls:
O Set the controls to the desired settings.
0 Press and hold the lock pad/iw
24 seconds.
\\]_en the controls are locked, the indicator
light will come on and the control settings
will not be displayed.
To unlock the controls:
Press and hold the lock pad fiw 3 seconds.
_Mter mllocking the controls, the settings
will be displayed, the lock indicator light
will go out and the settings can be changed.
4