Idiomas disponibles
Idiomas disponibles
MAINTENANCE AND REPAIRING
Drain out the water
After power OFF, pull out the drain insert (16) at the bottom of the
water tank to drain off the water from tank. Release the water gun
switch to drain off the water and steam in the system.
16
66
Hot water nozzle cleaning
If the water jet is not even, there may be dirt or lime in the nozzle.
Turn off the machine, disassemble the nozzle; insert the needle into
the nozzle hole and clean it from the impurities, reassemble the
nozzle, turn on the machine and check if the water jet is smoother
now.
Descaling
To prevent the accumulation of lime,
After every 3rd use (after 70 liters of water) or after storage
for more than 3 months, it is recommended to clean the pipe
with a household machine descaler (no vinegar).
The device can be cleaned with the special descaler from
Unkrautfuchs as follows:
1. Fill the tank halfway with tap water.
2. Put one level tablespoon (12 g) of machine descaler in the
tank.
3. Let the Unkrautfuchs run for 3 minutes so that the
descaler reaches all components in the device.
4. Now let the device stand for 10 minutes.
5. Then you can continue working normally.
Storage
Properly store in dry room protected from elements.
It is strictly prohibited for minors to operate to avoid accidental
injury.
WARNING! The Unkrautfuchs must be stored frost-free.
EN
67
