Idiomas disponibles
Idiomas disponibles
WORKING WITH STEAM
Connecting steam nozzle to the lance
Align the slot on the Steam Nozzle (11) with the extruder on the
Adapter (7). Then insert it and turn around 45° to lock it.
ATTENTION! Carefully snap the nozzle into place - do not use too
much force!
ATTENTION! Use the steam nozzles
for heavy mechanical work
exclusively directly at the gun,
not at the lance.
60
7
11
7 11
Connecting Easy Fit Adapter for steam
to the gun
To use the steam attachments without lance, mount the
corresponding adapter directly on the gun.
1. Align the thread on the steam adapter (9)
2. Carefully rotate the steam adapter (9) until
with the thread on the gun (5) and screw the
it is fixed in place. CAUTION: Only hand-tighten
steam adapter (9) clockwise onto.
lightly. The central part of the adapter (9-2)
should no longer be able to be turned by hand.
EN
3. Align the slot on the steam nozzle (11) with
the nose on the steam adapter (9) and push
the nozzle on as far as it will go, then turn it
45º.
61
