Idiomas disponibles
Idiomas disponibles
WORKING WITH STEAM
Mounting the steam attachments on the
Easy Fit Adapter for steam
4. After the steam nozzle (11) is connected,
5. If necessary, turn the steam adapter (9)
turn it gently clockwise. ATTENTION: Same
slightly tighter to ensure that the nozzle can sit
direction of rotation as adapter (see picture).
firmly on the adapter.
62
6. To disassemble the adapter (9), remove the
steam nozzle (11) first.
Power ON
Press and hold the power button on the dashboard for 3 seconds,
the water LED light will start flashing.
If necessary, replace the nozzle according to your needs.
Press the steam button with a single short tap, the water LED goes
out, the steam LED starts flashing.
A
B
Point the steam nozzle away from you. Take the gun (5) out of the
holder and press the locking button (5A). Press and hold the gun
trigger (5B) while the unit heats up (until the LED light is solid).
The steam LED will be solid when the steam temperature reaches
120°C.
5
EN
63
