Idiomas disponibles
Idiomas disponibles
OPERATION MANUAL
Power ON
Press and hold the power button on the dashboard for 3 seconds,
the water LED light will start flashing. Point the water nozzle at the
weeds or the ground. Take the gun (5) out of the holder and press
the locking button (5A). Press the gun trigger (5B) and hold it down
while the unit heats up (until the LED light is solid).
A
B
56
Pump is ON
Ready
5
Weed removal
When the machine is on, the water LED light will flash. If you hold
the lever down continuously, the LED will light up steadily after about
60 seconds. When ON and after LED light stops blinking after around
60 seconds, hot water has reached temperature above 90°C and
machine is ready for using it on weeds.
Aim the nozzle closely to the weed (as close as possible, optimal
around 5cm) and spray the plant at least 5 seconds. For weeds
between the gaps of brick stones hold it longer to affect the roots.
For best results use it 2-3 times for each area.
This device is not intended to be used for large grass areas.
EN
57
