Emerson AVENTICS 652 Instrucciones De Montaje página 16

• Minimize internet and business network exposure for all control system de-
vices and/or control systems.
• Ensure that products, control system devices and/or control systems are not
accessible from the Internet.
• Locate control networks and remote devices behind firewalls and isolate them
from the business network.
• If remote access is required, only use secure methods such as Virtual Private
Networks (VPNs).
NOTICE! Recognize that VPNs and other software-based products may have
vulnerabilities. A VPN is only as secure as the connected devices it serves. Al-
ways use the current version of the VPN, the firewall and other software-based
products.
• Ensure that the latest released software and firmware versions are installed on
all products connected to the network.
3 Scope of delivery
• 1x Assembly instructions
• 1x filter product variant or 1x pipe product variant (see order)
4 Transport and storage
4.1 Transporting the product
Hazards during transportation
• Proceed with caution and observe the information on the packaging when un-
loading and transporting the packaged product to the destination.
• Ensure that the product cannot fall down before the product is released from
the mountings.
• Take steps to avoid damage when lifting the product.
• Wear PPE.
4.2 Storing the product
Damage due to incorrect storage
Unfavorable storage conditions can result in corrosion and material deteriora-
tion.
• Only store the product in locations which are dry, cool, and prevent corrosion.
• Protect the product from direct sunlight and UV radiation.
• Keep the product in its packaging until the time of installation.
• Also observe any additional storage information on the product packaging.
4.3 Returning the product
• Before returning the product: Get in touch with our contact address. See back
cover.
• Observe the storage conditions until such time as you return the product.
5 Product description
5.1 Brief description
The product is used to monitor flow of compressed air, argon, helium, carbon
dioxide and gaseous nitrogen for industrial applications in accordance with the
technical specifications.
5.2 Labeling and identification
Product identification
The ordered product is clearly identified by the material number. The material
number can be found in these locations:
• On the name plate.
AVENTICS™ 652/653 | 549411-001-AD | English
CE mark
This product complies with the Electromagnetic Compatibility (EMC) Di-
rective 2014/30/EU and its amendments. The product is labeled with CE
identification. The declaration of conformity is available on request.
Please provide the material number and serial number for the correspond-
ing products.
5.3 Product overview
5.3.1 Versions
1
2
3
Fig. 1: Parts at a glance
1 Ethernet product variant: M12 plug,
8-pin, X-coded or IO-Link product
variant: M12 plug, 5-pin, A-coded
3 Buttons/control buttons
The product is available in the following product variants:
Series Product variant
652 Filter product variant
Pipe product variant
653 Filter product variant
Pipe product variant
6
5
Fig. 2: Dimensions of filter product variant
Table 1: Dimensions of filter product variant (specifications in mm)
Series Interface 1
652 IO-Link (A) 99
Ethernet (B) 99
653 IO-Link (A) 135
Ethernet (B)
135
2 Color OLED
Interface
IO-Link (A)
Ethernet (B)
IO-Link (A)
Ethernet (B)
IO-Link (A)
Ethernet (B)
IO-Link (A)
Ethernet (B)
2
1
7
2 3 4 5
132 71.4 178 35
132 75 178 35
180 71.4 219 46.5
180
75
219
46.5
3
4
6 7
107 38.3
107 38.3
119 43.8
119
43.8
16