Reversing The Door Swing - Haier HRF08WND Manual Del Usuario

Reversing the Door Swing

Left/right door opening method:
This product allows you to reverse the door opening from left to right and
back. You can select your preference of door opening by following the
procedure to make the change.
Dismantling:
1. Affix refrigerator and freezer door by sticking adhesive tape on both
sides to hold doors in place.
2. As shown in fig. 1, dismantle the hinge box cover on the upper part
of freezer door with a Phillips head screwdriver. Then remove the three
screws from the hinge. Take out the hinge by pulling it vertically, and
keep it in a safe place.
3. Remove the adhesive tape on freezer door, lift and take the door down,
and carefully put it aside.
4. Dismantle two screws of the central hinge, lift and take down the central
hinge, and keep them in a safe place. (see fig # 3)
5. Remove the adhesive tape on refrigerator door, lift and take down
refrigerator door, and carefully put it aside.
6. Remove the door stoppers from the freezer and refrigerator doors and
install them on the opposite side of the door. (Not on all Models)
screw holes
middle bracket
(central hinge bracket)
(see fig. # 1 and fig. # 3)
stop of freezer door (Not on all Models)
stop of refrigerator door (Not on all Models)
fig. # 3
middle pivot pin
English
8