Door Alignment; Reversing The Door Swing - Haier HRE10WNAWW Manual Del Usuario

HRE10WNAWW 2002.5.16
English

Door Alignment

1. Remove hinge cover screw.
2. Remove the top hinge cover.
3. Loosen the top hinge screws using a phillips head screwdriver.
4. Adjust the door or put a spacer in between and then tighten the screws.
5. Replace the top hinge cover.

Reversing the Door Swing

Left/right door opening method:
This product provides the reversing of the left/right door opening. You
can select your preference of door opening by following the procedure to
make the change.
Dismantling:
1. Fix refrigerator door by sticking adhesive tape on both sides to hold
door in place.
2. As shown in fig. 1, dismantle the hinge box cover on the upper part of
refrigerator door with a phillips head screwdriver. Then remove the
screws from the hinge. Take out the hinge by pulling it vertically, and
keep it in a safe place.
3. Remove the adhesive tape on refrigerator door, lift and take down
refrigerator door, and carefully put it aside.
7
12:50AM Page 8
(see fig. # 1)
(see fig. # 1)
fig. # 1