Finishing The Drying Cycle; Emergency Stop Of The Machine - Primus T9-35 Manual De Uso

4. Changing the drying programs :
It is possible to change the drying programs while the machine is working.
Version - Easy Control without coin meter : Select another program
by pressing the relevant temperature button. The program will increase
or decrease the drying temperature. The drying time remains unchanged.
Version - Easy Control with coin meter : Select another program by pressing the relevant temperature
button. The program will increase or decrease the drying temperature. The program will recalculate the
remaining amount of money. The drying time will be adapted accordingly.
5. Increasing the drying temperature :
Version - Easy Control without coin meter : Press the active temperature
button. The dot on the display will stop flashing. Press the button again
to increase the drying time.
Version - Easy Control with coin meter : Increasing of the drying temperature is not possible.
6. Advancing the drying program :
Version - Easy Control without coin meter : Press the button START while
the machine is working. The program will be advanced to further step.
Version - Easy Control with coin meter : Advancing the program is not possible.
7. Program end :
The time on the display will count down until „0". When „0" is reached. The drying cycle is finished and the door
can be opened. Remove the load immediately after the drying process is finished to avoid risk of linen burning.
REMARKS :
1. Loading and unloading the machine during drying process :
Stop the dryer by opening the door. Load or unload the linen in or from
the dryer. Be careful since the linen load can be significantly hot. Close
the door. Press the START button.
2. Interrupting of the drying process :
Version - Easy Control without coin meter : Advance the drying program
into next step by pressing the START button. Repeat the sequence until
the end of the program is reached.
Version - Easy Control with coin meter : Interruption of drying program is not possible in operation mode.
IMPORTANT: ALL MANUALLY OPERATED DRYERS ARE FACTORY EQUIPPED WITH AN EMERGENCY STOP
BUTTON LOCATED ON THE FRONT PANEL (NOT VALID FOR VERSION WITH COIN METER).
Emergency stop button:

4.4. FINISHING THE DRYING CYCLE

After the drying cycle is finished, the machine is prepared for another cycle. If you want to switch the machine off,
press emergency stop button (not valid for Easy Control with coin meter). To switch off the machine
completely, turn the main switch on the machine rear panel to position „OFF".
WARNING !
!
DO NOT INTERRUPT DRYING PROGRAM AND DO NOT SKIP THE STEP „COOL DOWN" AT THE END
OF DRYING CYCLE.

4.5. EMERGENCY STOP OF THE MACHINE

Versions - Full Control and Easy Control without coin meter : If operator's safety or health
is endangered, it is possible to stop the machine by pressing the button of emergency stop, see chapter 4.3.
Emergency stop button is located on the machine upper front panel.
Version - Easy Control with coin meter : The machine is not equipped with central stop button. The laundry
owner must be make arrangements for remote-located emergency stop device.
508 992 PUBLICATION DATE 08/05 USER'S MANUAL 11