Operating Instructions; Startup; Power Supply; Manual Microprocessor Models - Primus T9-35 Manual De Uso

4. OPERATING INSTRUCTIONS

4.1. STARTUP

Before the first start-up, make sure whether the machine is installed properly - see „Installation and maintenance
manual". Check the lint filter and other parts of the machine according to „Installation and maintenance manual".

4.2. POWER SUPPLY

Turn the main switch on the machine rear cover to position „on". If the machine is equipped with emergency
button, turn it slightly on the right. Display will light up. After few seconds it will fade - valid for Easy control
version. The machine remains in stand-by mode.
4.3. STARTING THE DRYING PROCESS

4.3.1. FULL CONTROL VERSION

1. Open tumbler door, load with laundry and securely close door.
2. Select desired Program setting. Do not select temperature that is
higher than the laundry maximum temperature. (For details
on pre-set drying temperatures and times revert to „Programming
manual Full Control"). The program number will light on the display.
For manual set-up of drying, press repeatedly the button Program
until you overstep program 20. Press the button Drying time,
Drying temperature, Cool down time, Moisture degree for setting-up
of individual parameters. Set required value using the button arrow up
or arrow down. Press enter to confirm the value.
3. Press Start.
4. Select Reversing or Non-Reversing. This selection is optional.
Not applicable for Non-Reversing model.
5. To load or unload tumbler during drying cycle, follow these steps:
a. Stop tumbler by opening tumbler door.
b. Load or unload tumbler.
c. Restarting dryer:
1. Close tumbler door.
2. Press Start.
6. Cycle is finished as soon as the sign „!UNLOAD!" is displayed.
7. Remove load immediately after cycle is finished.
NOTE: TO INTERUPT PROGRAM, PRESS STOP ONCE. TO CANCEL PROGRAM, PRESS STOP TWICE.
Stop button :

4.3.2. EASY CONTROL VERSION

1. Open the door and load the laundry into the drum. When the drum is loaded, close the door.
2. Select drying program :
Version - Easy Control without coin meter : Select the program by pressing
the temperature button. Do not select temperature that is higher than the
laundry maximum temperature. (For details on pre-set drying temperatures
and times revert to „Programming manual Easy Control"). The program
number will light on the display.
Version - Easy Control with coin meter : Select the program by pressing the temperature button.
Do not select temperature that is higher than the laundry maximum temperature. Insert a coin. The
pre-paid time value will be displayed. Insert further coins until the required drying time is reached.
3. Start the drying program :
The START button LED is flashing. Press the START button.
10 USER´S MANUAL PUBLICATION DATE 08/05 508 992