Idiomas disponibles
Idiomas disponibles
Digital Multimeter/English
1. Set the function switch to the highest V DC position.
2. Insert the black test lead banana plug into the negative (COM) jack.
Insert the red test lead banana plug into the positive (V) jack.
3. Touch the black test probe tip to the negative side of the circuit.
Touch the red test probe tip to the positive side of the circuit.
4. Read the voltage in the display. Reset the function switch to
successively lower V DC positions to obtain a higher resolution
reading. The display will indicate the proper decimal point and value.
If the polarity is reversed, the display will show (-) minus before the
value.
AC Voltage Measurements
WARNING:
Risk of Electrocution. The probe tips may not be
long enough to contact the live parts inside some 240V outlets for
appliances because the contacts are recessed deep in the outlets.
As a result, the reading may show 0 volts when the outlet actually
has voltage on it. Make sure the probe tips are touching the metal
contacts inside the outlet before assuming that no voltage is
present.
8
CAUTION:
Do not measure AC voltages if a motor on the
circuit is being switched ON or OFF. Large voltage surges may
occur that can damage the meter.
1. Set the function switch to the highest V AC position.
2. Insert the black test lead banana plug into the negative (COM) jack.
Insert red test lead banana plug into the positive (V) jack.
3. Touch the black test probe tip to the negative side of the circuit.
Touch the red test probe tip to the positive side of the circuit.
4. Read the voltage in the display. Reset the function switch to
successively lower V AC positions to obtain a higher resolution
reading. The display will indicate the proper decimal point and value.
DC Current Measurements
CAUTION:
Do not make current measurements on the 10A
scale for longer than 30 seconds. Exceeding 30 seconds may cause
damage to the meter and/or the test leads.
Digital Multimeter/English
9
