RS Pro RS-12 Manual De Instrucciones página 4

Digital Multimeter/English
SPECIFICATIONS
Function Range Resolution
DC Voltage 200mV 0.1mV
(V DC)
2000mV 1mV
20V 0.01V
200V 0.1V
600V 1V
AC Voltage 200V 0.1V
(V AC)
600V 1V
DC Current 2000µA 1µA
(A DC)
20mA 10µA
200mA 100µA
10A 10mA
Resistance 200Ω 0.1Ω
2000Ω 1Ω
20kΩ 0.01kΩ
200kΩ 0.1kΩ
2000kΩ 1kΩ
Battery Test 9V 10mV
1.5V 1mV
NOTE: Accuracy specifications consist of two elements:
• (% reading) – This is the accuracy of the measurement circuit.
• (+ digits) – This is the accuracy of the analog to digital converter.
NOTE: Accuracy is stated at 65°F to 83°F (18°C to 28°C) and less than
75% RH.
4
Accuracy
± (0.5% reading + 2 digits)
± (0.8% reading + 2 digits)
± (1.2% reading + 10 digits
50/60Hz)
± (1.0% reading + 2 digits)
± (1.2% reading + 2 digits)
± (2.0% reading + 2 digits)
± (0.8% reading + 2 digits)
± (1.0% reading + 2 digits)
± (1.0% reading + 2 digits)
SPECIFICATIONS Diode Test Test current of 1mA maximum,
open circuit voltage 2.8V DC
typical
Continuity Check Audible signal will sound if the
resistance is less than
approximately 30Ω
Battery Test current 9V (6mA); 1.5V (100mA)
Input Impedance >1MΩ
ACV Bandwidth 45Hz to 450Hz
DCA voltage drop
200mV
Display 3 ½ digit, 2000 count LCD, 1.1"
digits
Overrange indication "1" is displayed
Polarity Automatic (no indication for
positive polarity); Minus (-) sign
for negative polarity.
Measurement Rate 2 times per second, nominal
Low Battery Indication "BAT" is displayed if battery
voltage drops below operating
voltage
Battery one 9 volt (NEDA 1604) battery
Fuses mA, µA ranges; ceramic
0.2A/250V fast blow 5mm x
20mm
10A range; ceramic 10A/250V
fast blow 5mm x 20mm
Operating Temperature 32°F to 122°F (0°C to 50°C)
Digital Multimeter/English
5