Warranty - Auxilab MEDIBAS+ Manual De Uso

distilled water. Do not spray water on the rotor since liquid could stay or reach other
components and cause corrosion.
-
Use a cloth or tweezers to remove the solid residues from the inner chamber of the
centrifuge.
-
The motor shaft and the hole of the rotor must be well greased.
-
Maintenance of the motor shaft:
o
Turn the centrifuge on through the general switch and wait until self-test is
finished;
o
Press button
o
Use the supplied wrench to disassemble the rotor and remove it from the motor
shaft; clean the rotor nut. Note: turn clockwise to tighten the nut and
anti-clockwise to loosen it;
o
Clean the conical part of the motor shaft, and then grease it well.
-
In case of breakdown do not try to repair the equipment by yourself; apart from losing
warranty you can cause damages in the general performance and operation of the
equipment as well as damages to people (burns, wounds,.. ) and the power supply or
nearby electrical devices.
-
Only use original accessories, the use of other type of accessories could cause damages
to the equipment and the users.
-
Make sure the centrifuge is turned off and disconnected from the net in case of long
periods of no use.
Transport, storage
The centrifuge is a precision equipment so during transport or storage prevent it from
moisture, knocks or horizontal positions.
Fragile

6.3 Warranty

-
This equipment is protected under the Warranties and consumer goods regulation
to open the lid；
Vertical
Figure 8: Cautions during transport and storage.
- 47 -
Avoid moisture