Preliminary Preparation; Transport And Installation; Choose The Right Installation Place - Auxilab MEDIBAS+ Manual De Uso

Chart 1: Type of adapters and technical parameters
Nº
(Adapters) (ml×quantity)
1
2
3

4. Preliminary preparation

4.1 Transport and installation

Medibas+ centrifuge is supplied in a box with all the necessary protections to assure a
safety transport of the equipment. Please, open the box and remove all protections.
The net weight of the equipment is approximately 30 Kg; to
avoid damages in the motor shaft, remove the rotor before
moving or transporting the centrifuge. Do not shake the
centrifuge!
For long-distance transport or movement, please use the original box, close it properly and
keep it always in vertical position; handle the equipment with care.

4.2 Choose the right installation place

Medibas+ centrifuge has been designed for indoor use and the installation place should be
in accordance with the below requirements:
-
When the centrifuge is running, a safety distance of 20 cm around the equipment must be
kept free of hazardous substances and free of people;
-
The supporting surface must be solid, horizontal and free of movements or vibrations; in
case of using movable surfaces, the centrifuge must be perfectly held to assure a safety
operation;
-
There must be a minimum distance of 10-15 cm between back and lateral sides of the
centrifuge and the wall or adjacent equipments in order to ensure smooth flow of air and
cooling cycle of the equipment;
-
Centrifuge should be placed away from windows to avoid heat and direct sunlight
exposure.
-
Once the equipment is placed, make sure the four legs stand evenly on the horizontal
surface and the equipment is well level;
-
The room in which the centrifuge is place must be clean and with a constant room
temperature between 5-40ºC and a relative humidity ≤ 80%.
Capacity Max. speed
(rpm)
100×4 4000
50×8 4000
15×16 4000
Max. relative
centrifugal
force (×g)
2630
2720
2790
- 37 -
Type of tube
PP
PP
pp