Idiomas disponibles
Idiomas disponibles
ae
To avoid damage to the chair
. Do not sit on or drop the controller. Do not pull the controller cord or the power
cord. Be careful not to catch the cord of the controller between the arm rest
and the chair back.
2. Do not treat the chair roughly, such as forcing the reclining lever, turning the
chair on its side, turning the chair over and standing on it.
3. Do not treat the covering roughly.
e Keep sharp or pointed objects away from the cloth of the chair. Be careful
not to drop lit ashes or matches on the chair.
e Exposure to direct sunlight can cause fading or a change in color of the
covering.
4. If the massager functions abnormally, immediately turn off the power and have
the massager checked by an authorized servicenter.
5. Do not attempt to repair the massager yourself.
6. Do not repeatedly operate any switch at short intervals. It may cause the
switch to malfunction.
7. Some sounds may be heard coming from the massager while in use. This is
due to the structure of the massager. This is a normal condition.
8. Make sure that there are no obstacles behind the chair when reclining it. The
chair can be reclined to the maximum angle of 170°. If the back hits a wall or
pillar, it may malfunction. Be sure to have ample space behind the chair.
Recline chair slowly so that an obstacle can be noticed quickly.
9. When excessive pressure is applied to the massage heads, they may stop
moving for safety. When moving the heads up from the lowered position, the
body weight may stop the heads movement. In such case, slightly lift the body
and let the heads move up.
10. After each massage, slide power switch on side of massager to "off" position
and turn its lock switch to "lock" position.
NOTE: Maximum user weight is 264 Ibs (120 kg).
CARING FOR THE MASSAGER
e Always unplug chair before cleaning.
e |f the covering becomes soiled, dampen with liquid, soap and then brush the
surface, wipe with acloth dampened with water. Allow to dry naturally. If the
plastic portions become soiled use lukewarm water, with liquid soap on a soft
cloth to clean the surface.
e Do not use thinner, benzene or other solvent type cleaners.
