Idiomas disponibles
Idiomas disponibles
• Cleaning and user maintenance shall not be made by children unless they are older 8 years and supervised.
• Keep the appliance and its cord out of reach of children less than 8 years.
• Do not operate the appliance with an external timer or similar remote system.
• Do not repair the device by yourself. Please contact authorized personnel. In order to avoid hazards, a damaged
mains cable must be replaced with an equivalent cable by the manufacturer, our customer service or any other
qualified specialist.
• Place the appliance on a level work surface. Ensure that mains cord and appliance are not placed on or in close
proximity of hot surfaces or heat sources. Run the mains cord away from sharp objects.
• Set up the appliance steady and slip-proof. The appliance can move when kneading heavy dough. Place the ap-
pliance on a rubber mat if the work surface is slippery.
• Do not move or lift the appliance during operation; first turn it off and disconnect from mains power supply. Always
carry the appliance in both hands!
• Do not remove the baking tin during operation!
• The operation of electric heating appliances creates high temperatures, which can cause burns (e.g. baking tin,
heating element).
WARNING: Risk of burning!
Only touch or remove hot components with oven gloves!
• Let the appliance cool down completely before cleaning ore storing.
• Use this appliance only to prepare foodstuffs, do not use for other purposes. We are not liable for damages due to
improper use or operation!
Unpacking
•
Remove the appliance from the gift box.
•
Remove all packaging materials, such as plastic foil, filling materials,
cable clips and cardboard.
•
Check that all accessories are contained in the box.
•
Check the appliance for possible transport damage to prevent
hazards.
•
In case of incomplete delivery or damage, do not operate the de-
vice. Return it to your dealer immediately.
•
Clean the appliance as described in chapter "Cleaning".
Start-up
Electric Connection
1. Confirm that your mains voltage matches the specifications on the
type label before connecting to mains power supply.
2. Connect the appliance to a properly installed wall outlet.
A buzzer sounds and the display shows the basic setting (see "Description
Control Panel", "1 LCD Display"). The appliance is then ready for use.
Location of Controls
A Mains cable
B Control panel with display
C Lid handle
D Ventilation slots
E Lid with viewing window
F Side ventilation slots
G Baking tin
H Kneading hook
I
Casing
J Status indicator
Accessories:
a) Measuring cup
b) Measuring spoon
c) Hook for removing the kneading hook
Control Panel
1 LCD display
shows information about desired program number, browning, bread
weight (marked with arrow) and baking time.
2
FARBE button
to set the desired browning
3
AUSWAHL button
to select the programs described in chapter "Program Sequence
Bread Maker".
4
START/STOPP button
to start and end the program
5 Status indicator
6
TEIGMENGE button
to set the 2 weight levels, as described later
7
/
Time button
to enter the program timer setting
Description Control Panel
1 LCD Display
BASIC SETTING (start image)
This displays standby mode. It corresponds with the basic program. The
display shows "I 3:00". The "I" stands for the selected program; "3:00"
stands for the program duration. The positions of two arrows show the
selected browning and the weight. The basic setting after turning the
appliance on is: "Higher weight" (level II) and "Medium browning"
(MITTEL). During operation the display shows the program duration
counting down.
47
