Idiomas disponibles
Idiomas disponibles
English (Original instructions)
E N
Troubleshooting
Problem
The screen does not turn on
Food is raw/burnt
Smoke comes out of the
appliance during the first use
Appliance gives off odour
Control panel does not respond
NOTE: If after consulting this table you still cannot solve the problem, please contact our Customer
Service team.
Cause
Power failure
Power socket without current or
bad contact
The supply voltage does not
match the rated voltage of the
product.
Circuit board fault
Incorrect time or temperature
selected
Too much food in the basket
There are residues of anti-rust
oil in the air fryer
There are food residues inside
the fryer
Oil or water residue on the
control panel
You have oil or water on your
hands
Solution
Check condition and maintenance
of power supply equipment
Contact our Technical Assistance
Service
Adjust the temperature and
cooking time according to the
amount of food and cooking
preferences.
If you have too much food fry it in
batches. Less food in the basket
allows for more even heating.
Preheat the fryer for 10 to 15
minutes at maximum
temperature.
Clean the fryer and its
accessories as described under
"Cleaning".
Clean and dry the control panel
with a cloth.
Wash and dry your hands.
