Idiomas disponibles
Idiomas disponibles
Dispose of the batteries according to local
standards. Defective or used batteries must
be recycled in accordance with Directive
2006/66/EC. Hand in the batteries at a
used battery collection point where they
are recycled in an environmentally friendly
manner. For more information, please
Spare parts/accessories
Spare parts and accessories can be obtained at
If you do not have internet access, please contact the Service Centre via telephone
(see "Service-Center" Page 40). Please have the order number mentioned below ready.
Position
Position
instruction
exploded
manual
drawing
11/12
31/32
21
10
22
9
24-29
24
25
26
27
28
29
* MAN = approved for manual feeds.
n = max. rotation speed (min
HW = cutting blades are made of hard metal.
** Dimensions of the cutter (mm): Cutter diameter
R = radius of the profile (mm)
)
= angle of the V-notch
contact your local waste management
provider or our service centre.
Dispose of batteries in a discharged state.
We recommend covering the contacts with
an adhesive strip to protect against short
circuits. Do not open the battery.
www.grizzlytools.shop
Description
Collet chuck (8mm) + Cap nut
Suction adapter
Parallel stop
6-part cutter set
(MAN / n=max. 35000 / HW)*
Profil cutter (25.0x12.0x8 / R 4 mm)**
Rounding cutter (22.0x11x8 / R 6.3 mm)**
V-notch cutter (12.7x9.0x8 /
Notch cutter (12.0x20.0x8)**
Notch cutter (6.0x20.0x8)**
Fillet cutter (22.0x13.x8 / R 6.3 mm)**
-1
) for which the cutter is approved.
Ø
90°)**
)
x length of the cutter head x shaft diameter
GB
MT
Order No.
91105642
91105641
91105640
91104255
37
