Idiomas disponibles
Idiomas disponibles
Stop the appliance by selecting position 0 on
the selector knob.
Unplug the appliance from the mains.
Uncouple the jug from the motor body.
Clean the appliance.
PULSE / ICE PICK FUNCTION
The appliance operates at maximum speed for
optimum performance.
This function provides optimum results for
crushing ice to the desired level.
Turn the selector knob to the left to operate this
function (I).
It is recommended to work by pressing the
button in 3-second cycles and repeat the
operation until the desired result is obtained.
USING THE FILTER
The device has a
specially designed to
obtain pulp-free juices.
Simply place the
inside the jug and then
the lid.
CLEANING
Unplug the appliance from the mains and
let it cool down before starting any cleaning
operation.
Clean the unit with a damp cloth soaked in a
few drops of detergent and then wipe it dry.
Do not use solvents, products with an acid or
basic pH factor such as bleach, or abrasive
products to clean the appliance.
Do not allow water or other liquids to enter
through the ventilation openings to prevent
damage to the internal operating parts of the
appliance.
Do not immerse the appliance in water or any
other liquid, nor put it under the tap.
During the cleaning process, special care
should be taken with the blades as they are very
sharp.
It is recommended to clean the appliance
regularly and remove all food residues.
If the appliance is not kept in a good state
of cleanliness, its surface may degrade and
inexorably affect the life span of the appliance
and lead to a dangerous situation.
The following parts are suitable for cleaning in
hot soapy water or in the dishwasher (using a
gentle wash program):
- Jug.
- Stopper.
- Lid.
Then dry all parts before assembly and storage.
SELF-CLEANING FUNCTION:
Introduce water and a small amount of
detergent into the jug.
Select the "turbo" function.
REMOVABLE BLADES FOR EFFECTIVE
CLEANING:
Unplug the appliance from the mains and
let it cool down before starting any cleaning
operation.
Loosen the blade
ring by turning it
clockwise (Fig. 3).
Remove the blade fixing ring, the blades and
the sealing gasket and clean them (Fig.4).
After cleaning, replace the blade and turn the
locking ring counterclockwise.
