Idiomas disponibles
Idiomas disponibles
EN
(Original instructions)
DESCRIPTION
A
Cup
B
Lid
C
Jar
D
Sealing blade ring
E
Blades set
F
Fixing ring
G
Speed selector knob
H
Motor body
I
Pulse / Ice crush function+
J
Filter
USE AND CARE:
Before each use, fully extend the power cord of
the appliance.
Do not use the appliance if its accessories are
not properly attached.
Do not use the appliance if the accessories
attached to it are defective. Replace them
immediately.
Do not use the appliance with an empty jug.
Do not use the appliance if its start/stop device
does not work.
Do not move the appliance while in use.
Do not use the appliance at an angle or turn it
upside down.
Respect the maximum level indication (1750
ml).
Do not add a volume of hot liquid greater than
half the capacity of the jug, and in any case, if
there are hot liquids inside the jug, use only the
slowest speed.
Keep this appliance out of the reach of children
and/or persons with reduced physical, sensory
or mental capacities or lack of experience and
knowledge.
Keep the appliance in good condition. Check
for misalignment or binding of moving parts,
breakage of parts, and other conditions
that may affect the proper operation of the
appliance.
Never use liquids that are boiling or ingredients
whose temperature exceeds 80ºC.
Do not use the jug immediately after taking it out
of the dishwasher or refrigerator, make sure that
the jug is at room temperature.
Check that the lid is tightly closed before
starting the appliance.
Do not use the appliance for more than 1 minute
at a time. In case of cycles always respect rest
periods of at least 2 minutes between cycles.
Under no circumstances should the appliance
be left running for longer than necessary.
Do not use the appliance with frozen food or
bones.
WARNING: Do not use the appliance if the
glass is cracked or broken.
INSTRUCTIONS FOR USE
NOTES BEFORE USE:
Ensure that you have removed all packaging
material from the product.
Before using the product for the first time,
clean the food contact parts as described in the
Cleaning section.
USE:
Fully extend the cable before plugging in.
Make sure that the blade attachment ring
is securely attached to the jug (by turning it
counterclockwise) before placing it on the motor
body (Fig. 1).
Place the jug on the motor unit, making sure it is
securely fastened (Fig.2).
Insert the ingredients, after chopping them, into
the jug with liquid.
Place the lid on the jug, making sure that it is
securely fastened.
Place the cap on the lid.
Plug the appliance into the mains.
Switch on the appliance by pressing the selector
knob (G).
The pilot light will illuminate.
If you wish to add more ingredients, remove the
cap.
Add the ingredients and replace the cap.
To stop the appliance, select speed "0" again.
To avoid a too abrupt start, we recommend
starting the appliance with the power selector
knob in its minimum position, and progressively
once the appliance has started.
ELECTRONIC SPEED CONTROL:
The speed of the appliance can be controlled
by simply acting on the speed control knob
(G). This function is very useful as it allows the
speed of the appliance to be adapted to the type
of work to be carried out.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
