Prior To Operation - Hitachi Koki CJ 14DL Manual De Instrucciones

How to make the batteries perform longer.
Recharge the batteries before they become
completely exhausted.
When you feel that the power of the tool becomes
weaker, stop using the tool and recharge its
battery. If you continue to use the tool and exhaust
the electric current, the battery may be damaged
and its life will become shorter.
Avoid recharging at high temperatures.
A rechargeable battery will be hot immediately
after use. If such a battery is recharged immediately
after use, its internal chemical substance will
deteriorate, and the battery life will be shortened.
Leave the battery and recharge it after it has cooled
for a while.

PRIOR TO OPERATION

1. Power switch
Ensure that the switch is in the OFF position.
2. Confirming condition of the environment:
Confirm that the work site is placed under
appropriate conditions conforming to prescribed
precautions.
3. Dust produced in operation
The dust produced in normal operation may affect
the operator's health. Either of following way is
recommended.
a) Wear a dust mask
b) Use external dust collection equipment
When using the external dust collection
equipment, connect the adapter with the hose from
external dust collection equipment. (Fig. 5)
Notch
Base
Rear
hole Dust
collector Adapter
4. Changing blades
CAUTION:
●
Be sure to switch power OFF and disconnect the
battery from the body when changing blades.
●
Do not open the lever when plunger is moving.
Hook
Cleaner
Fig. 5
(1) Open the lever up to the stop. (Fig. 6-arrow I)
(2) Remove fitted blade.
(3) Insert new blade up to the stop in the blade holder.
(Fig. 6-arrow II)
(4) Close the lever. (Fig. 6-arrow III)
NOTE:
Confirm the protrusions of blade inserted to the
blade holder surely. (Fig. 7)
Confirm the blade located between the groove of
roller. (Fig. 8)
Blade
Blade holder
Blade
Roller
Fig. 8
English
Blade
Blade
holder
Lever
Fig. 6
Fig. 7
Blade
Roller
13