Proxxon LWB/E Instrucciones De Servicio página 14

The wheel may bind, walk up or kickback
if the power tool is restarted in the work-
piece.
g)
pieces tend to sag under their own weight.
Supports must be placed under the work-
piece near the line of cut and near the
edge of the workpiece on both sides of the
wheel.
h)
may cut gas or water pipes, electrical
wiring or objects that can cause kickback.
a)
The wire bristles can easily penetrate light
clothing and/or skin.
b)
Loose bristles or wires will be dis-
charged during the run-in time.
c)
cles and tiny wire fragments may be dis-
charged at high velocity during the use of
these brushes and may become imbed-
ded in your skin.
For use in dry environments only
Protection class II device
Wear safety glasses!
- 14 -
Large work-
The protruding wheel
Small parti-
Please do not dispose off
the machine!
Read all instructions and safety rules!
Because of its construction, the LWB/E angle
drill can be operated even at inaccessible
areas that cannot be reached with convention-
al drills. This is made possible through the
long slender neck of the aluminium die-cast
head and the mitre gear, which enables the
drill to be aligned by 90°. With the comprehen-
sive range of commercially available acces-
sories, other work is also possible such as
drilling, grinding, milling and polishing and
more. The LWB/E is powered by a quiet direct
current motor for a long service life and great-
est reliability. The supplied collets can clamp
the shafts of the bits and cutters up to max.
3.2 mm, guaranteeing greatest concentric ac-
curacy.
1. Adjustable speed dial
2. ON/OFF switch
3. Bow
4. Connecting cable
5. Locking button
6. Steel collet chucks
7. Union nut for collet chucks
1 pc. LWB/E long-neck angle drill
1 pc. Storage case
1 pc. Operating instructions
1 pc. Safety guidelines
1 pc. Steel collets
(1 each for 1.0 – 1.5 – 2.0 – 2.4, 3.0 and
3.2 mm)