Idiomas disponibles
Idiomas disponibles
Assembly
Note this assembly information:
Vibrations can disturb the functionali-
„
ty of the discharge valve and suction
valve.
Secure the metering pump to prevent
vibrations from occurring.
The valves cannot close properly if
„
they are not vertical.
Make sure that the suction valve and
discharge valve are vertical.
Assembly of the pump
To attach the pump to a base surface,
use screws with a diameter of < 4.5.mm
to screw both sides of the pump
through the fixing holes provided.
≥10 mm
20
70
80
10
EXTERN
90
STOP
100
TEST
Z12x10
Z12x10
* available in other designs and lengths
2 m*
≥10 cm
100 – 230 V ±10%
50/60 Hz
9
EN
