Idiomas disponibles
Idiomas disponibles
5.
When inflating objects, check the status of the
tool and object, and be sure that there is no air
leak from the object.
6.
Always be careful not to over-inflate objects
during operation. It otherwise may burst the
objects, possibly causing damage to the tool and
personal injury.
7.
After inflating objects, check the air pressure
using a reliable and calibrated measuring
equipment.
8.
Never leave the tool unattended when the
nozzle or attachment is attached to the object
or during operation.
9.
Do not use the tool as a vacuum cleaner.
Performing dust collection may damage the tool.
10. Do not use the tool as a breathing device.
Use only standard accessories provided
11.
by Makita. The use of any other accessories
or attachments might present a risk of injury to
persons.
Maintenance and storage
1.
Keep all nuts, bolts and screws tight to be sure
the dust blower is in safe working condition.
If the parts are worn or damaged, replace them
2.
with parts provided by Makita.
3.
Store the dust blower in a dry place out of the
reach of children.
4.
When you stop the dust blower for inspection,
servicing, storage, or changing accessory,
switch off the dust blower and make sure that
all moving parts come to a complete stop, and
remove the battery cartridge. Cool down the
dust blower before making any work on the
dust blower. Maintain the dust blower with
care and keep it clean.
5.
When carrying the tool, do not hold or pull a
nozzle or attachment. The tool may be damaged
and cause an injury.
6.
Always cool down the dust blower before
storing.
7.
Do not disassemble the tool.
Service
Have your power tool serviced by a qualified
1.
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Never service damaged battery packs. Service
2.
of battery packs should only be performed by the
manufacturer or authorized service providers.
SAVE THESE
INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product.
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious
personal injury.
Symbols
The followings show the symbols used for tool.
volts
direct current
Important safety instructions for
battery cartridge
1.
Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using
battery.
2.
Do not disassemble or tamper with the battery
cartridge. It may result in a fire, excessive heat,
or explosion.
3.
If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4.
If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5.
Do not short the battery cartridge:
Do not touch the terminals with any con-
(1)
ductive material.
Avoid storing battery cartridge in a con-
(2)
tainer with other metal objects such as
nails, coins, etc.
(3)
Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
Do not store and use the tool and battery car-
6.
tridge in locations where the temperature may
reach or exceed 50 °C (122 °F).
Do not incinerate the battery cartridge even if
7.
it is severely damaged or is completely worn
out. The battery cartridge can explode in a fire.
Do not nail, cut, crush, throw, drop the battery
8.
cartridge, or hit against a hard object to the
battery cartridge. Such conduct may result in a
fire, excessive heat, or explosion.
9.
Do not use a damaged battery.
10. The contained lithium-ion batteries are subject
to the Dangerous Goods Legislation require-
ments.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consult-
ing an expert for hazardous material is required.
Please also observe possibly more detailed
national regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move
around in the packaging.
8 ENGLISH
