Please Assist With Battery Recycling; Removing The Built-In Battery - Pioneer XW-LF3-T Manual De Instrucciones

Please assist with battery
recycling
This product uses a lithium-ion battery.
Lithium-ion batteries are a vital resource
that can be recycled. When throwing the
unit away, please remove the lithium-ion
battery and endeavor to have it recycled.
In regard to cautions for when removing the
lithium-ion battery, please see "Handling
the built-in lithium-ion battery".
Warning
• Disconnect the AC adapter before
performing these procedures.
• In the event that the power is turned on
while performing these procedures, turn
off the power and then begin the
procedures again.
Caution
• The instructions provided here to "assist
with battery recycling" are meant to
allow the device's built-in rechargeable
lithium-ion battery to be removed at the
end of the device's service life, before
final device disposal. The device's
warranty is invalidated the moment the
device is opened.
• In order to avoid short circuits, remove
the battery only after confirming that the
battery's storage capacity has been fully
depleted. Even when the power no
longer turns on, some residual current
remains in the battery. It is
recommended to remove the lithium-ion
battery only after leaving the device with
the power turned on for several days, to
assure that the battery is fully depleted.
22
En
Removing the built-in
battery
Preparation
This procedure requires the tools listed
below. Be sure to assemble the
necessary items before beginning.
• Phillips (+) screwdriver
• Flat-head (–) screwdriver
1 Remove the stand cover on the
bottom of the product from the
button side.
Stand cover
2 Unscrew the two screws and
remove the battery holder.
Battery holder
Tips
• Unscrew the screws using a Phillips (+)
screwdriver.
Screw