Operating Environment - Pioneer XW-LF3-T Manual De Instrucciones

CAUTION
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING
This equipment is not waterproof. To prevent a fire or shock hazard, do not place any
container filled with liquid near this equipment (such as a vase or flower pot) or expose it
to dripping, splashing, rain or moisture.
WARNING
To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle)
on the equipment.
VENTILATION CAUTION
When installing this unit, make sure to leave space around the unit for ventilation to
improve heat radiation (at least 10 cm at top, 10 cm at rear, and 10 cm at each side).
WARNING
Slots and openings in the cabinet are provided for ventilation to ensure reliable operation
of the product, and to protect it from overheating. To prevent fire hazard, the openings
should never be blocked or covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet or a bed.

Operating Environment

Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in locations exposed to high
humidity or direct sunlight (or strong artificial light).
CAUTION
The switch on this unit will not completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect device for the unit, you will need
to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit
has been installed so that the power cord can be easily unplugged from the AC outlet
in case of an accident. To avoid fire hazard, the power cord should also be unplugged
from the AC outlet when left unused for a long period of time (for example, when on
vacation).
2
En
D3-4-2-1-1_B1_En
D3-4-2-1-3_A1_En
D3-4-2-1-7a_A1_En
D3-4-2-1-7b*_A1_En
D3-4-2-1-7c*_A2_En
D3-4-2-2-2a*_A1_En