Blackmagic Design 2110 IP Converter 3x3G Manual De Instalación Y Funcionamiento página 17

Outputs
Use the outputs tab to label the SDI outputs. For example, if SDI output 2 is connected to a
HyperDeck Studio HD Plus, enter 'HyperDeck HD Plus' in the output 2 field. If you are using an
NMOS controller to route your sources and destinations, you can select 'HyperDeck HD Plus'
from the destination selection tab.
Labels
You can also save or load label sets using the cog icon in the lower left corner of the utility.
To save a label set, click on the save option and navigate to a location to save the file.
To load a label set, click on the load option and navigate to the location of your label set. Once
selected, click open.
Setup
Setup settings let you change the name of your converter, change network settings, displays
the current version of your converter's internal software and view multicast output addresses.
Identification Settings
Use the identification settings to enter the name and language for your converter.
Blackmagic Converters Setup 17