Idiomas disponibles
Idiomas disponibles
Clean the filter/collection bag every 4 hours of operation or when the air does not exit through it
After carrying out all the previous steps, manually remove the largest remains of dirt or plant material present in
the equipment and its components. Next, wash down with a pressure sprayer or a hose all the components and
the equipment in general. Water is one of the two most important cleaning agents. It should be used to remove
between 60% and 70% of all traces of dirt or plant material present on the equipment.
In order to dissolve the dirt in the best way, it is necessary to keep the water temperature between 32 °C and 57
°C. Finally, to complete the cleaning, spray the equipment and its components with Master Clean. Do not use deter-
gents or other cleaning products not specified by the manufacturer. Let Master Clean act for several seconds and
then remove it only with the help of paper.
13.3. Mounting
Once the equipment and its main components have been cleaned, assemble the equipment following the instruc-
tions detailed below.
1. Place the filter/collection bag following the indications shown in the following image.
30
¡IMPORTANT!
correctly because it is too blocked.
¡IMPORTANT!
Make sure that the filter bag is well positioned.
www.masterproducts.es
