Idiomas disponibles
Idiomas disponibles
8. Electric connection
The electrical connection must be carried out using a 230 V and 50/60 Hz single-phase power supply.
9. Placement
The Master Seeds 200 must be placed on a flat surface, without irregularities, in which its stability and a good working
position are ensured. It is only suitable for indoor use and should not be used in hazardous environments or in damp
or wet locations. Never expose the control panel directly to water. It is very important to keep the work area well lit and
free of obstacles because disorder leads to accidents.
It is required to use the machine in perfectly ventilated areas because the possible dust generated can be a health
hazard. It is essential to use a face or dust mask whenever the user works with the equipment.
Master Products sells within the range of industrial vacuum cleaners, the Trim Filter Seeds. It is a powerful and efficient
aspiration system compatible with Master Seeds 200. Contact the Master Products sales department or any of its au-
thorized distributors to request or receive information on this product.
10. Start up
10.1. Assembling
Master Seeds 200 is delivered completely protected and boxed. It is necessary to remove the equipment from the
box and verify that all the material received is in perfect condition, and that the quantities are as indicated. If not,
contact Master Products or any of its authorized distributors. It is necessary to place the equipment in a work area
that is well ventilated, illuminated and free of obstacles.
To facilitate the star up of the equipment, it is recommended to place all the supplied components on a flat surface
and perform all the steps detailed below.
www.masterproducts.es
23
