cecotec BOLERO COOLMARKET UF 380 INOX D Manual De Instrucciones página 75

d. Remove the fixing screws from the hole cover on the top left side of the
freezer, remove the cover and pull the communication cable out of the hole.
Remove the door hole cover from the top left side of the door, remove the door
communication cable and install the door shaft sleeve, then cover it (Fig. 6).
e. Lift the freezer door 50 mm to remove it (Fig. 7).
f. Remove the left levelling leg, unscrew the screws securing the hinge and then
remove the hinge assembly (Fig. 8).
Legend Fig. 8:
1. Adjustable foot
2. Lower hinge
3. Screws
g. Relocate the door stop and lower hinge shaft to the hinge. Carry out the
following steps (Fig. 9):
1. Remove the screw fixing the cover with a Phillips screwdriver.
2. Remove the nut and washer securing the hinge shaft with a spanner.
3. Place the hinge shaft into the hole on the left side of the lower hinge and
secure it firmly with the removed nut and washer (Fig. 10).
4. Align the hole in the door stop with the hinge shaft, install them correctly and
then secure the door stop with the removed screw.
Legend Fig. 9:
1. Door stop
2. Screw
3. Lower hinge
4. Adjustable foot
5. Hinge shaft
6. Door joint
7. Nut
Legend Fig. 10:
1. Hinge shaft
2. Door joint
3. Nut
4. Door stop
5. Screw
6. Lower hinge
BOLERO COOLMARKET UF 380 INOX D
ENGLISH
75