Settings Menu - Fiorenzato XGi Serie Manual Del Usuario

Series
In this fi eld, two different icons can be displayed:
system display icon enabled. This is only displayed when the
weighing system is enabled (§5.4.2.2). If the
14
disabled, the icon is not shown on the display.
Warning icon. It only appears at the end of the time set by Fiorenzato
to indicate the need to replace the grinding blades (§ 6.1.5).
5.4.2 Disabling/Enabling the automatic weighing system
When the appliance is switched on for the fi rst time, the default mode of operation with
the automatic weighing of doses is loaded (
5.4.2.1 Disabling the automatic weighing system
To disable the operation of the system and switch to dispensing doses in the TIME
mode, it is necessary to press the function key
through the menu until you reach the "XGi SYSTEM" option, then:
• Disable the system by pressing the relevant selector.
XGi System
• Press the " " function key to return to the HOME page.
• The automatic weighing system has been disabled and the grinder-doser will
use the dose dispensing by TIME mode according to the parameters set in the
"Change dose time" page of the menu (§ see 5.4.3.1).
5.4.2.2 Activation of the automatic weighing system
To enable the operation of the system and switch to dose dispensing by WEIGHT
mode, it is necessary to press the function key
through the menu until you reach the "XGi SYSTEM" option, then:
• Enable the system by pressing the relevant selector.
XGi System
• Press the " " function key to return to the HOME page.
• The automatic weighing system has been enabled again and the grinder-doser
will ask you to perform the 'Initial start-up' procedure (see §5.3) to calibrate the
appliance before it can dispense the doses again by WEIGHT using the parameters
set on the "Change grinding weights" page of the menu (§ see5.4.3.1).
Fiorenzato | Series_00 Ed. 04/2022
EN
system is
enabled).
(seeFig. 12 Part 9) and scroll
(seeFig. 12 Part 9) and scroll
25 / 49
EN
5.4.3

Settings Menu

The 'Settings menu' allows you to set and adjust all the parameters and operating modes
of your grinder-doser.
The Settings menu is accessed by pressing the
the bottom left-hand corner of the display (see Fig. 12 Part 9). Once the command has
been given, the display will load the menu, allowing you to select the parameter to be
changed and/or the function to be enabled/disabled by simply scrolling down the list of
possible options until you fi nd the option you require.
As already described in paragraph5.4, some options in the "Settings" menu change
according to the type of dose dispensing selected (by WEIGHT or by TIME). Below
are the menus displayed for an enabled system (dosing by WEIGHT) and a
disabled system (dosing by TIME). Each option in the two menus is associated
with a reference to the paragraph describing the individual function/screen.
Settings menu with enabled system (dose dispensing by WEIGHT):
Technical Settings
• Change grinding weights (§ 5.4.3.1)
• Dose weight display (§ 5.4.3.2)
• Show statistics (§ 5.4.3.5)
• Triple dose display (§ 5.4.3.6)
XGi Settings
• XGi system (§ 5.4.3.7)
• Initial start-up (§ 5.4.3.8)
User Settings
• Display brightness (§ 5.4.3.9)
• Screen appearance (§ 5.4.3.10)
• Screensaver (§ 5.4.3.11)
• Language (§ 5.4.3.12)
• Date and time (§ 5.4.3.13)
• Information (§ 5.4.3.14)
Safety Settings
• Reset dose weights (§ 5.4.3.15)
• Administrator password (§ 5.4.3.16)
26 / 49
Series
function button, always visible in
Settings
Technical Settings
Change dose weights
Dose weight display
Show statistics
Triple dose display
XGi Settings
XGi System
Initial Start-up
User Settings
Display brightness
Screen appearance
Screensaver
Language
Date and time
Information
Safety Settings
Reset dose times
Administrator password
Fiorenzato | Series_00 Ed. 04/2022