Display; User Menu; Settings Menu; Coffee Dose Adjustment - Fiorenzato F64E Manual De Instrucciones

Display

When the grinder-doser is switched on, the dis-
play shows, on the left, the temperature, the
number of coffees made throughout the day
(Today), during the current week (Week) and
the Total . On the right, it shows the percentage
humidity, the time, the date and the grinding
mode selected in green .
26 °C
Today: 76
Week: 355
Total: 1571

USER MENU

To access the user menu, keep the
pressed until an intermittent sound starts
(about 5 secs .) . Three yellow buttons will light
up . Use the buttons
the menu and change the setting . Use the but-
ton to select and confirm . Exit the menu af-
ter confirming by pressing the button
• Language
English, Italiano, Español, Français, Deutsch,
Português, Chinese, Russian, Korean, Malay-
sian, Thai, Greek .
• Time
Set time .
• Time Layout
12 or 24 hours .
• Date
Set date .
• Temperature
Centigrad or Fahrenheit .
• Brightness
Percentage .
• Information
Firmware version and Serial Number .
44%
10:30 am
Wed 1 Oct 2014
Standard
button
and to move through
.

SETTINGS MENU

To access the user menu, keep the
pressed until an intermittent sound starts
(about 5 secs .) . Three yellow buttons will light
up .Use the buttons
the menu and change the setting . Use the
button to select and confirm . Exit the menu
after confirming by pressing the button
• Grinding Time
Single and double grinding secs .

• Mills Replacement

Hours .
• Mills Reset
Reset mills timer .
• Factory Reset
Restore factory settings .
• Statistics
Show statistics .
• Manual Grinding
Activate manual grinding
• Grinding Mode
Standard, Automatic, PRE/SEL e Direct .

COFFEE DOSE ADJUSTMENT

Access the settings menu, select Grinding Time .
Then select the seconds for single grinding op-
tion and confirm . Adjust the seconds for the
double grinding option and confirm again .
MILLS REPLACEMENT
When the grinding mills need to be replaced,
a warning appears on the display . The state of
wear can be monitored by accessing the set-
tings menu and selecting Mills Replacement .

Important

After replacing the grinding mills, the replace-
ment timer needs to be reset . To do this, ac-
cess the settings menu, select Mills Reset and
confirm the reset .
26 °C
21
button
and to move through
button .
44%
.