Menù; Settings Menù; Coffe Dose Adjustment; Mills Replacement - Fiorenzato F4 NANO Manual De Instrucciones

USER MENU
To access the user menu, keep the
pressed until an intermittent sound starts
(about 5 secs.). Three yellow buttons will light
up. Use the buttons
the menu and change the setting. Use the but-
ton to select and confirm. Exit the menu af-
ter confirming by pressing the button
• Language
English, Italiano, Español, Français, Deutsch,
Português, Chinese, Russian, Korean, Malay-
sian, Thai, Greek.
• Time
Set time.
• Time Layout
12 or 24 hours.
• Date
Set date.
• Brightness
Percentage.
• Information
Firmware version and Serial Number.
SETTINGS MENU
To access the user menu, keep the
pressed until an intermittent sound starts
(about 5 secs.). Three yellow buttons will light
up.Use the buttons
the menu and change the setting. Use the
button to select and confirm. Exit the menu
after confirming by pressing the button
• Grinding Time
Single and double grinding secs.

• Mills Replacement

Hours.
• Mills Reset
Reset mills timer.
• Factory Reset
Restore factory settings.
• Statistics
Show statistics.
• Manual Grinding
Activate manual grinding
COFFEE DOSE ADJUSTMENT
Access the settings menu, select Grinding Time.
button
and to move through
.
button
and to move through
button.
Then select the seconds for single grinding op-
tion and confirm. Adjust the seconds for the
double grinding option and confirm again.
MILLS REPLACEMENT
When the grinding mills need to be replaced,
a warning appears on the display. The state of
wear can be monitored by accessing the set-
tings menu and selecting Mills Replacement.
Important:
the replacement timer needs to be reset. To do
this, access the settings menu, select Mills Re-
set and confirm the reset.

SAFETY DEVICES

Thermal overload protection
The grinder-doser motor is protected against
overheating resulting from overcurrents by
a thermal overload protection which, when
tripped, cuts off the power supply to the mo-
tor. If the thermal protection device should au-
tomatically turn on in the event of anomalous
operation (such as the grinding blades jam-
ming), turn off grinder-doser using the On-Off
switch, unplug it from the mains, and contact
skilled technical personnel. Never perform any
work on the grinder-doser while it is attached
to the mains, in order to prevent the motor
from turning on suddenly. If the grinder-doser
overheats as a result of the motor stopping,
. allow the grinder-doser to cool down before
performing any repair work.
Coffee outlet guard
The coffee outlet guard must always be fixed to
the doser unit using the relevant screws, which
must never be removed by the user. The re-
moval of the coffee outlet guard can be done
by skilled technical personnel only after dis-
connecting the grinder-doser from the power
supply by unplugging. Before reconnecting the
grinder-doser to the power supply, replace the
safety device.

NOISE LEVEL

EEC Countries - The maximum noise emission
of our coffee grinders and grinders/dosers
22
After replacing the grinding mills,