Idiomas disponibles
Idiomas disponibles
EN
9.6.4 MODIFYING THE SETTINGS
Selecting the OPERATING mode
Briefly press button P4 (MENU) to view the current operating mode on
the display and from the relative LED.
Pressing button P4 after allows for cyclically selecting the operating
modes signalled on the display and by the relative LED.
The setting is memorised automatically after 4 seconds.
If the fan is in function, LED L5 lights up.
Selecting the operating speed
Briefly press button P2 (DECREASE) or P3 (INCREASE) to view the set
speed of the fan. Alternatively press the following buttons to modify
the fan speed setting:
- PO = fan off, only in MANUAL operating mode (MAN)
- P1 = minimum speed
- P2 / P3 / P4 = intermediate speeds
- P5 = maximum speed
The fan speed cannot be modified if the PROPORTIONAL operating
mode (PROP) has been set.
In the AUTOMATIC operating mode (AUTO) the settable speeds are
P1 / P2 / P3 / P4 / P5.
24
9.6.5 PARAMETERS
Parameter
Fan activation temperature
Fan activation thermostat hysteresis
ALARM activation temperature
SAFETY activation temperature
Fan SAFETY activation temperature
SAFETY Function Enabling
Fan SAFETY Function Enabling
STAND-BY Function Enabling
BUZZER Function Enabling
Fan Surge Duration
No. of Fan Power Levels
P1 Fan Speed
P5-1 Fan Speed
P5 Fan Speed
Adjustment temperature range in PROP mode
COMMISSIONING AND USE
Acro-
De-
nym
fault
SET
50°
iSt
4
TAL
150
100
TSI
°C
TSA
180°C
SIC
1 [on]
SAF
0 [off]
Stb
1 [on]
Enb
1 [on]
t01
0
Pn
5
U01
37
-Un
46
Un
100
DEL
85°
CS.STB.IST-1_EN_Rev.1.0_08-23
