Idiomas disponibles
Idiomas disponibles
ENGLISH
As well as holding down the arrow
Automatic mode
You can choose from 3 route modes:
Left - down.
Right - down.
Up - down.
-
You can also select the automatic spraying mode.
water from the tank whenever it moves to the right.
-
Remember that the spray frequency has been stablished according to the natural operation
of the device, so the automatic mode will ensure good results.
Cleaning instructions
Step 1. Dry cleaning Fig. 8
-
For the first use, you must use the "dry mode". Do not activate the spray mode or spray
water/glass cleaner. If the surface to be cleaned has too much sand, remove the sand
previously.
-
If the surface to be cleaned has a lot of sand, it could form mud when spraying. Cleaning
would not have an optimum result.
-
If you use the machine in sunny days or with low humidity, the dry mode will get better
results.
Step 2. Spraying mode Fig. 9
-
Choose the spraying mode. Select the automatic or manual cleaning mode, according to
the desired spraying frequency or the areas to be cleaned.
-
Remember that if the device cloths are too wet, you may not get the desired cleaning
result. It is recommended to slightly moisten them.
4. CLEANING AND MAINTENANCE
-
Use a soft, damp cloth to clean the product's outside surface.
-
The cleaning cloths are washable and reusable.
54
that indicates the path you want the robot to follow
. The robot will automatically spray
